How a hydraulic press works

A hydraulic press multiplies force by pushing on a liquid trapped between two pistons of different sizes: a small push on the small piston becomes a big push on the large one. The rule behind it is Pascal's law, and the price you pay is distance.

Pascal's law

NASA's Glenn Research Center states it this way: when there is an increase in pressure at any point in a confined fluid, there is an equal increase at every other point in the container. Push on the liquid in one place and the same extra pressure shows up everywhere inside, including on the face of the big piston.

Where the extra force comes from

Pressure is force per unit area. Because the pressure is the same on both pistons, the force on each one grows with its area:

F1 / A1 = F2 / A2F is the force on a piston, A is its area

In NASA's example, 1 pound pushing on a piston of 1 square inch makes a pressure that lifts 10 pounds on a piston of 10 square inches. Make the big piston larger, or the small one smaller, and the force grows in the same proportion.

The trade-off: distance

The liquid that leaves the small cylinder has to go into the big one, so the volumes match: A1 times D1 equals A2 times D2, where D is how far each piston moves. The small piston travels a long way while the big one moves a little. The gain in force, called the mechanical advantage, is A2 / A1, which is the same as D1 / D2. That is why a press closes slowly when it does its hardest work.

How the game uses this

In Press Crush the ram travels freely until it meets something. Then the pump has to build pressure, and the ram creeps while the force on the screen climbs, until the object gives or the press reaches the most its power setting allows. The force numbers in the game are game units for comparing objects, not real measurements.

Source: Pascal's Principle and Hydraulics, NASA Glenn Research Center. Don't try this at home: real presses can crush hands and throw broken glass.